Max flow (m³/h) : 22010

Working point: 18100m³/h@1450Pa

Weight (kg): 217

Power (kW): 15

Speed (rpm): 2935

Imax (A) 400V / 690V: 27.4 / 15.9


Dimensions (mm):

ØD1 = 535


A1 = 606

A2 = 407

B1 = 357

B2 = 492

C = 365 

D2 = 12

E = 952

F = 914


BACKWARD CENTRIFUGAL FAN, FOR CLEAN OR SLIGHTLY DUSTY AIR
MANUFACTURING FEATURES
• Medium pressure centrifugal fan with direct coupling.
• Reinforced housing made of carbon laminated steel, protected against corrosion by powder coating polyester resin RAL 5010. Finish C3.
• Casing fully latched and adjustable.
• Self-cleaning turbine and reinforced impeller with high-performance backward (reaction) blades made of carbon laminated steel dynamically balanced to minimize noise and vibrations. Black painted RAL 9005
• The size of the centrifugal impeller and casing is larger than a NIMUS , which increases the performance of the unit.
• Squirrel cage standardized asynchronous IEC motor with IP-55 protection and class F electrical insulation. Standard voltages 230/400V 50Hz for three-phase motors up to 4kW and 400/690V 50Hz for higher powers.
• Motor with feet (B3) supported on motor support foot.
• Models of size 500 and above are supplied with a front support foot, for the other models the front support foot is optional.
• Available in the following orientations (to be indicated in case of order): LG0, LG45, LG90, LG135, LG180; LG225, LG270, LG315, RD0, RD45, RD90, RD135, RD180; RD225, RD270, RD315.
• Maximum working temperature in continuous: air transported: 130ºC,

Environment: 60ºC.


APPLICATIONS
Suitable for moving clean or dusty air. Designed to be installed in conduit for suction or impulsion.

         Paint booths.
         Collection of dust.
         Food industry dryers.
         Food processing.
         Incineration.
         Odor control in industry.
         Indoor / outdoor pollution control.
         Big buildings.
         Malls.
         Factories / Industrial buildings.
         Warehouses.
         Extraction of smoke.
         Boilers and ovens.
         Manufacture and treatment of chemical products.
         Tunnels, underground stations.

ON DEMAND

· Fans for special voltages.
· 2 speed motor.
· C4 or C5 coating painting
· Hot dip galvanized
· Inox 304 (normal or electropolished finish)
· Inox 316 (normal or electropolished finish)
· Cooling wheel
· Anticaloric paint
· Fully welded housing (waterproof)
· Inspection door to facilitate maintenance and cleaning
· Drain plug.
· Airtight axle
· Non-sparking air passage and standard motor

Centrifugal fan NIMAX 504 T2 15kW

  • Modèle : NIMAX 504 T2 15kW
  • Disponibilité : En Stock
  • 4 408,94€

  • H.T. : 3 643,75€

CCV Pay

Promotions

Seat15 M2 0.37kW

Seat15 M2 0.37kW

Body & impeller: PolypropyleneRotation: LG or RDMaximum air flow (m3/h): 900Maximum pressure (Pa..

738,34€ 821,15€ H.T. : 610,20€

Seat15 M4 0.25kW

Seat15 M4 0.25kW

Body & impeller: PolypropyleneRotation: LG or RDMaximum air flow (m3/h): 460Maximum pressure (Pa..

702,24€ 780,26€ H.T. : 580,36€

Seat15 T2 0.37kW

Seat15 T2 0.37kW

Body & impeller: PolypropyleneRotation: LG or RDMaximum air flow (m3/h): 900Maximum pressure (Pa..

676,80€ 751,99€ H.T. : 559,34€

Seat15 T4 0.18kW

Seat15 T4 0.18kW

Body & impeller: PolypropyleneRotation: LG or RDMaximum air flow (m3/h): 460Maximum pressure (Pa..

642,78€ 714,19€ H.T. : 531,22€

Seat15 T6 0.18kW

Seat15 T6 0.18kW

Body & impeller: PolypropyleneRotation: LG or RDMaximum air flow (m3/h): 280Maximum pressure (Pa..

722,54€ 802,81€ H.T. : 597,14€

Seat20 M2 0.75kW

Seat20 M2 0.75kW

Body & impeller: PolypropyleneRotation: LG or RDMaximum air flow (m3/h): 2400Maximum pressure (P..

809,83€ 899,80€ H.T. : 669,28€

Seat20 M4 0.25kW

Seat20 M4 0.25kW

Body & impeller: PolypropyleneRotation: LG or RDMaximum air flow (m3/h): 1400Maximum pressure (P..

744,71€ 827,45€ H.T. : 615,46€

Seat20 T2 0.75kW

Seat20 T2 0.75kW

Body & impeller: PolypropyleneRotation: LG or RDMaximum air flow (m3/h): 2400Maximum pressure (P..

787,13€ 874,59€ H.T. : 650,52€